We are very proud to
present you with the new revolutionary MR10 Loop System.
This is our 4th generation of loop systems, and the result of 20+
years of accumulated know-how and experience we have from working
with guitar players around the world. We always strive for the
This is the next generation of our famous MR9 Loop System.
The MR10 will set the standards for loop systems years from now.
Our highly recognized high impedance input buffer is integrated in
this unit, and our extremely low-noise line driver is dedicated for
every single return signal, ensuring that all impedance and signal
level matching issues are dealt with and taken care of.
The difference is mind blowing.
Experience the real sound of your stomp boxes, without the impedance
mismatch you normally have in
conventional loop systems. Each stomp box sounds as if it was the
only unit in your system.
Click here to buy the MR10 >>
10 audio loops that can be divided into two groups if required.
Group 1 with 6 loops, and group 2 with 4 loops. Each group has
seperate input and output.
Both inputs utilize our highly recognized high impedance input
A DPDT switch on the rear of the unit selects if you want to divide
the loops into two groups or if you want to link all 10 audio loops.
When linked only the first input and last output are active.
Everything is taken care of internally. No need for patch cables.
Unique RFI protection on every incoming and outgoing signal, and an
isolated Tuner Output are standard feartures.
The MR10 is without a doubt the most noiseless and silent switching
loop system available - even in high gain and very high volume
The MR10 will recognize both Midi Program Change and Midi Control
- 10 audio loops, configured
as 10 loops or 6+4 loops
- Line driver on every return
- Industry-leading buffering
- Completely silent switching
19" x 1U x 200 mm
9VAC / 650mA